PRINCIPAL PUBLICATIONS AND PRESENTATIONS

J. Montesinos, R. S. Gorur, Zimmer, L. and Hubele, N.  (2000) “Statistical Models for Failure Modes of Polymeric Materials for High Voltage Outdoor Insulation,” IEEE Transactions on Dielectrics and Electrical Insulation, 7(3), p. 408-415.

Wang, Hubele, Lawrence, Miskulin, Shahriari, (2000) "Comparison of Three Multivariate Process Capability Indices," Journal of Quality Technology, 32(3),      263-275.

Dumitrescu, M. and Hubele, N.F. (1999). "An Entropic Framework for the Normal Distribution in Capability Analysis," Communications in Statistics. Theory &   Methods, 28(6), 1361-1377.

Wang, F.K. and Hubele, N.F. (1999). "Quality Evaluation Using Geometric Distance Approach," International Journal of   Reliability, Quality and Safety, 6(2), pp. 139-153.

Zimmer, L.S., and Hubele, N. (1997).  “Quantiles of the Sampling Distribution of Cpm,” Quality Engineering, Vol. 10, No. 2, pp. 309-329.

Roberts, C., Hubele, N., Henderson, M. and Stage, R. (1997).  “Manufacturing Evaluation Using Resource-based Template-free Features,” Journal of Intelligent Manufacturing, Vol. 8, pp.323-331.

Ranaweera, D., Hubele, N.F. and Karady, G. (1996).  “Fuzzy Logic for Short-Term Load Forecasting,” International Journal of Electric Power and Energy System, Vol. 18, No. 4, pp. 215-222.

Cheng, C. and Hubele, N., (1996).  “A Pattern Recognition Algorithm for Control Charts,” IIE Transactions, Vol. 28, pp. 215-224.

Hubele, N.F. and Arndt, M.W. (1996).  “A Review of Crash Data Analysis in a Defect and Recall Investigation of the General Motors C/K Pickup Trucks,” Accident Analysis & Prevention, Vol. 28, No. 1, pp. 33-42.

Rivera, L., Hubele, N.F., Lawrence, F., (1995).  “Cpk Index Estimation Using Data Transformation,” Proceedings of 17th International Conference on Computers and Industrial Engineering, Phoenix, AZ., March 6, Published as Computers and Industrial Engineering, Vol. 29, No. 1-4, pp. 55-58.

DeKoster, D.R., Morror, K.P., Schaub, D.A. and Hubele, N.F. (1995).  “Impact of Electric Vehicles on Select Air Pollutants:  A Comprehensive Model,” IEEE Transactions on Power Systems, (Aug.) Vol. 10, No. 3.

Hubele, N. (1995).  “Discussion” of article by O. Mohammed, D. Park, R. Merchant, T. Dinh, C. Tong, A. Azeem, J. Farah, and C. Drake, “Practical Experiences with An Adaptive Neural Network Short-Term Load Forecasting System,” IEEE Transactions on Power Systems, (Feb.) Vol. 10, No. 1, p. 263.

Shahriari, H., Hubele, N.F., Lawrence, F., (1995).  “A Multivariate Process Capability Vector,” presented at the 4th Industrial Engineering Research Conference, Nashville, TN, May 24.

Ranaweera, D., Hubele, N.F. and Paplexopoulos, A., (1995).  “Application of a Radial Basis Function Neural Network Model for Short-Term Load Forecasting,” IEE Proceeding C (refereed). Vol. 142, No. 1, pp. 45-50.

Hubele, N.F. and Hwarng, H.B., (1994).  “A Neural Network Model and Multiple Linear Regression:  Another Point Of View,” 1994 Artificial Neural Networks in Engineering, Intelligent Engineering Systems Through Artificial Neural Networks, Vol. 4, Proceedings of the Artificial Neural Networks in Engineering (ANNIE ‘94), St. Louis, November 13-16, pp. 199-203.

Ranaweera, D., Karady, G. and Hubele, N.F., (1994).  “Comparison of Artificial Intelligence-Based Models for Long-Term Load Forecasting,” Proceedings of International Conference on Power System Technology, pp. 1158-1162.

Hubele, N.F., (1994).  “Load Forecasting:  A Contact Sport,” Panel Discussion Chair, IEEE PES Summer Meeting, San Francisco, July 24-27.

Zimmer, L. and Hubele, N., (1994).  “Example Average Run Lengths for a Cpm Control Chart,” 48th ASQC Spring Conference, May, Las Vegas, pp. 577-582.

Hubele, N.F., Beaumariage, T.G., Baweja, G.S., Hong, S. -C and Chu, R., (1994).  “Using Experimental Design to Assess a Vision Inspection System Capability:  A Case Study,” Journal of Quality Technology, Vol. 26, No. 1, pp. 1-11.

Peng, T.M., Hubele, N.F., Karady, G., (1993).  “An Adaptive Neural Network Approach to One-Week Ahead Load Forecasting,” IEEE Transactions on Power Systems, Vol. 8, No. 3, pp. 1195-1203.

Hwarng, H. and Hubele, N., (1993).  “X-bar Control Chart Pattern Identification through Efficient Off-line Neural Network Training,” IIE Transactions, Vol. 25, pp. 27-39.

Hwarng, H. and Hubele, N., (1993).  “Back-Propogation Pattern Recognizers for X-Bar Control Charts,” Computers and Industrial Engineering, Vol. 24, No. 2, pp. 219-235.

Hwarng, H. and Hubele, N., (1992).  “Boltzmann Machines that Learn to Recognize Patterns on X-Bar Control Charts,” Statistics and Computing, 2, pp. 191-202.

Roberts, C., Henderson, M. and Hubele, N. (1993).  “An Architecture for Feature-based Manufacuturing Evaluation Using Statistical Process Control Information,” 2nd Industrial Engineering Research Conference, Los Angeles, May 26-27.

Hubele, N., Henderson, M. and Roberts, C. (1993).  “A Framework for Feature-based Manufacturing Evaluation Using Statistical Process Control Information,” Sixth National Symposium Statistics & Design in Automated Manufacturing, ASU, Tempe, AZ, February 17-19.

Hubele, N. and Si, J. (1993).  “Discussion of Classical Forecasting Techniques and Neural Networks Applied to Short-Term Electric Load Forecasting,” IEEE Power Engineering Systems, Winter Conference, Panel Discussion, Columbus, OH, February 2.

Cheng, C-S. and Hubele, N.F. (1992).  “Design of a Knowledge-Based Expert System for Statistical Process Control,” Computers and Industrial Engineering, Vol. 22, No. 4, pp. 501-517.

Peng, T.M., Hubele, N.F., Karady, G. (1992).  “Advancement in the Application of Neural Networks for Short-Term Load Forecasting,” IEEE Transactions on Power Systems, Vol. 7, No. 1, pp. 250-257.

Evans, M., N. Faris Hubele, Gochoel, A., Cheng, C-S. (1992).  “A Case Study of Family Formation for Statistical Process Control of Small Batch Manufacturing,” Fall Technical Conference, ASQC.

Hubele, N.F., Hwarng, H.B. and Zimmer, L., (1992).  “Capability Indices:  Linking TQM with Concurrent Engineering,” 1992 International Industrial Engineering Conference Proceedings, May 17-20, Chicago, pp. 175-179.

Shahriari, H. and Hubele, N. (1992).  “A Contribution to Multivariate Statistical Control,” Winter Conference of American Statistical Association, January 5, Louisville, KY.

Hubele, N.F., Montgomery, D., and Chih, W. (1992).  “An Application of Statistical Process Control in Jet-Turbine Engine Component Manufacturing,” Quality Engineering, Vol. 4, No. 2, pp. 197-210.

Hubele, N. and BaFail, A. (1991).  “A Multi-Process Bayesian Model for Electric Load Forecasting,” Applied Mathematical Modeling (British), Vol. 15, September, pp. 489-492.

Hwarng, H. and Hubele, N.F. (1991).  “X-Bar Chart Pattern Recognition Using Neural Nets,” 1991 ASQC Quality Congress Transactions, May 20-22, Milwaukee, pp. 884-889.

Peng, T.M., Hubele, N.F. and Karady, G. (1990).  “Conceptual Approach to the Application of Neural Network for Short-Term Load Forecasting,” 1990 IEEE International Symposium n Ciorcuits and Systems, May 1-3, New Orleans, pp. 2942-2945.

Hubele, N.F. and Cheng, C.-S. (1990).  “Identification of Seasonal Short-Term Forecasting Models Using Statistical Decision Functions,” IEEE Transactions on Power Systems, Vol. 5, No. 1, pp. 40-45.

Hubele, N., Shahriari, H. and Cheng, C. (1991).  “A Bivariate Capability Vector” in Statistics and Design in Process Control:  Keeping Pace with Automated Manufacturing, Keats and Montgomery, eds., Marcel Dekker, pp. 299-310.

Hubele, N.F. and Chang, S.I. (1990).  “Adaptive Expotential Weighted Moving Average Schemes Using a Kalman Filter,” IIE Transactions, Vol. 22, No. 4, pp. 361-369.

Hubele, N.F. and Lin, Y. (1989).  “Decision Analysis for Unit Commitment in Electric Power Generation Planning” CORS/TIMS/ORSA 27th Joint National Meeting, May 8-10, Vancouver, British Columbia.

Hubele, N.F. and Lin, Y. (1989).  “Decision Analysis Involving Electric Load Forecasts,” International Industrial Engineering Conference, May 14-17, and Societies Manufacturing and Productivity Symposium Proceedings, pp. 325-332.